bitter_end_mesh_airsoft

Bitter End Airsoft Gear

These goggles have been modified with a high quality stamped steel convex lens and painted in various patterns or solid colors.

The stamped steel that is used in these goggles have been tested at 400+ FPS with .23's at point blank range and showed just minimal deflection. They have also been field tested by thousands of players from around the World to ensure high performance.

Check on my "Frequently Asked Question" page to find the answer you are looking for!

(Left click on any goggle photo or goggle name for large multi-view photos and prices)

DEADLY - Wiley CQC goggle frames modified with Bitter End Stamped Steel
The highest quality frame and lens available - SPECIAL ORDER ONLY

SG1 - Wiley goggle frames modified with Bitter End Stamped Steel
The highest quality frame and lens available - SPECIAL ORDER ONLY

BULL DOGG - Light weight monsters with full coverage
Back while supplies last! Bitter Ends most popular goggle! A soft foam full seal and wide comfortable head band

GROUND ZERO - Light weight goggle frames with full coverage - with a soft foam full seal and wide comfortable head band

BATTLE READY - Light weight goggle frames with full coverage
with a soft foam full seal and wide comfortable head band

CHOPPER FAST STRIKE - Light weight safety glass style frames
slim design for those who prefer to wear glasses without a strap

SPORT - Light weight low profile goggle
Folds in the middle and has a foam seal -

RICOCHET - Light weight low profile goggle
Folds in the middle and has a foam seal, prefect for a small face

AIR STRIKE - Light weight goggle frames with full coverage
with a full firm foam seal and a wide comfortable head band -

C-4 FAST STRIKE - Light weight safety glass style frames
Slim design for those that prefer to wear glasses style -

BITTER END LOWER FACE MASK - By popular demand
Available now!

I DO NOT sell Sykes masks, Save Phace masks, Oakley goggles, Flakjak goggles, or any other item that is not listed above in the Bitter End Airsoft Goggles section.

If you are looking for a Save Phace mask, left click on the Save Phace banner to surf over to their website. Tell Jerry that Bitter End sent you.

Custom Goggles and Masks

Often I get requests for custom goggles, or goggles that I don't carry that are required for someone to play Airsoft. I try to accommodate everyone's needs in the Airsoft community as time dictates and may be able to cut a custom lens for your goggle or mask.

Have a question? You might find the answer here!

Here are a few examples of some of the goggles that have come through my studio.

Save Phace tactical mask with a Bitter End Lens

Sykes tactical mask with integrated Bitter End Lens System

Sykes tactical mask with integrated Bitter End Lens System

JT Elite Mask system modified with Bitter End stamped steel lens

Standard Government Issue ESS Goggles to fit over glasses

Custom ordered pair of Oakley A Frames

Custom ordered pair of Arena Flakjak

Here are a few Testimonials from Airsoft players that use Bitter End Airsoft Goggle

Just received my lower face mask, it truly is fantastic, and only 7 days from America to Ireland. I will certainly be shopping with you again.

Thanks

Graham

I got a couple of your glasses here a few weeks ago, just a quick email to say they ROCK !!!
They give you the edge when your on the field!! Thanks again mate they are well worth it!

Alan

Hiya mate, just wanted to let you know how much I think the specs were the best investment I have made. They give me excellent protection at all times, and no fog up. This weekend in low temperatures, been playing in some thick heavy kit, got a little too warm at times and would normally have been fogged up, not today, clear view all day long. Saved my ass a few times as well.

Thanks alot for an excellent job.

Adam

Since the first time I tried on a pair of these stamped steel lens glasses, I haven't used anything else for Airsoft. They are light weight, look great, and you can actually paint them to match the color of the camo you wear! I've even used them for night mission, and had no problem using them with night vision. The best part however, has to be not fogging up anymore. Before, there were times when my goggles fogging up would make it so I was battlefield ineffective. Those days are behind me now thanks to these glasses.

DEADLY - Team M.A.G.

Ever since I swapped to your stamped steel lens goggles, I will never go back! The quality and durability is awesome and plus there isn't any fogging and the lens can take a high powered impact from an AEG to a Gas Sniper with out any give.

Derek Mayberry

I was using plastic lensed goggles that fogged up really bad. Then I found these and have been very happy with them! The stamped steel lenses make it impossible to fog up, and they can take a hit. Comfortable and stylish!

Killamucho

I was convinced there was nothing better out there when one of my teammates, Ben, tripped and fell on a stick. He ended up with a pretty nasty black eye, but the stamped steel goggles saved him from becoming blind. Something that can take a hit like that, and not fog up, is definitely a quality product.

The cool thing is, Ben still wears the same goggles, and they only have a little scratch.

Roger L. Eccles, 1st-Sword Airsoft

I can confirm this story and if you any need confirmation on these goggles are the best ones out here I stand behind them 100% and nothing well ever compare to the goggles I use every time I play. If you were to measure the force in FPS I probably hit that branch at 800 or 900fps and it was a direct impact on the stamped steel lens of the goggles and I only ended up with a cut on my nose above my eye and just really bad looking shiner for a week. Thanks Bitter End for the goggles and you have a least one customer for life!

Ben

By bidding on or purchasing Bitter End Airsoft Goggles™

You affirm you are over 18 years old (as you know; minors cannot agree to anything)

You understand that these goggles have been MODIFIED and DO NOT meet any ANSI guidelines or requirements (yes, it's true! The lens is full of holes!)

You assume any and all risk of injury of any kind that may occur while using these modified goggles and hold harmless Bitter End Airsoft Goggles™ and any agent or representatives

You know and understand all of the DANGERS of high speed flying projectiles while using and shooting Airsoft equipment and the potential for serious injury

**While these goggles are unused, some goggles may show slight imperfections or small scratches from the stamped steel lens installation process. This does not effect the high performance of these goggles.

To control the quantity and quality of Bitter End Airsoft Goggles™ I have not set up an automatic check out/shopping cart. Each lens must be cut, shaped and filed. Then degreased, primered and painted. What comes next is a tricky little procedure of getting dozens of sharp metal points into a plastic goggle frame without completely destroying the frames... My promise to you is you will never get a pair of Bitter End Airsoft Goggles™ that I would not wear on the field myself.

If you would like a pair of Bitter End Airsoft Goggles™, shoot me an e-mail

Yes, it's true! Most of your questions are answered here!